The Lamylie LED street lamp delivers solar-powered outdoor lighting with autonomous operation, designed to brighten gardens, pathways, and driveways without relying on grid power.
Constructed for durability in exposed environments, it features a sturdy ABS shell paired with a high-quality PC lampshade and carries an IP65 rating, ensuring protection against dust ingress and low‑pressure water jets.
Choose from multiple power configurations, each pairing a battery with a corresponding solar panel: 50W with a 1500mAh battery and a 6V‑1.5W panel; 80W with a 3000mAh battery and a 6V‑2.5W panel; and 120W with a 5200mAh battery and a 6V‑4W panel. The 120W variant also includes a USB charging option for additional power solutions.
Charging and run time are designed for easy, automatic operation: direct sunlight recharges the battery in about 5–6 hours, enabling 8–10 hours of lighting after dusk.
Three intelligent sensing modes adapt to activity and ambient light levels to optimize energy use. Mode 1 uses a low-light background with motion-triggered brightening for 20 seconds when movement is detected, then returns to dim. Mode 2 activates full brightness on motion during night hours and switches off again 20 seconds after no activity. Mode 3 keeps a gentle, continuous low light all night without motion sensing.
Remote control provides additional convenience, with a 6–8 meter range and four operating modes. The remote lets you adjust between color temperatures and toggle between modes M1 (motion-activated brightness with dimming), M2 (motion-activated brightness with automatic off when motion ends), M3 (constant 20% brightness all night without sensing), and EM (always on with no motion sensing, manual override). Before first use, ensure the main power button on the lamp body is switched on. Color temperature can be changed via the remote among warm white (3000K), natural light (4500K), and white light (6000K).
Color temperature options depend on whether a remote is included: non-remote models offer White light at 6000K or Warm White light at 3000K. Remote-enabled models provide 6000K, 4500K, and 3000K options for flexible illumination.
For installation, position the lamp at a height of approximately 3–3.5 meters. Mark the wall mounting points, insert expansion plugs into the holes, tighten screws so about 5–8 millimeters remain protruding, and mount the fixture securely on the screws.
The 120W variant includes USB charging for an additional power source, expanding how you can recharge the unit when needed. The white light models emit a single cool white at 6000K, while the warm white models emit a single warm white at 3000K. Remote-enabled versions provide three color temperatures and multiple remote-controlled modes for versatile lighting options.