IronClasp — Hang Heavy Frames & Mirrors Flush Without the Crooked Slip - Lamylie

Achieve a truly flush hang for heavy frames and mirrors with IronClasp. Two stainless steel Z-clips—one attaches to the wall, the other to the back of your frame—snap together into a single locked unit that sits flat against the surface and stays perfectly level.

When the two clips connect, they align at about a 2 mm offset, preventing front-face tilt and keeping the entire piece flush as you walk by.

Designed to handle heavier items, it supports full-length mirrors, wooden headboards, and sectional couch connections—not limited to lightweight art or prints.

Removal for cleaning or moving is fast and screwdriver-free: lift the frame straight up to disengage, then lower it back into place when ready.

Two Pieces. One Click. Frame Locked Flush Against the Wall. Each pair consists of two interlocking stainless steel plates with a central hook. Wall plate hooks upward, frame plate hooks downward; when the frame rests, the hooks slide together and the weight tightens the connection. No bulky brackets or visible nail heads; screws sit in countersunk holes for a near-invisible gap.

What’s in the pack includes screws and white plastic anchors for drywall, so you can mount directly into drywall without hunting for studs or purchasing extra hardware. For very heavy items, aiming for at least one stud is still recommended.

Sizes available: Small 40 mm × 30 mm or Large 54 mm × 30 mm — choose by frame weight.

Install in 3 Steps — No Stud Finder Required

1. Screw one Z-clip to the wall with the hook facing up. Use the included anchors for drywall.
2. Screw the matching Z-clip to the back of your frame, mirror, or headboard with the hook facing down.
3. Lower the frame onto the wall clip. The hooks slide into each other and lock under the frame’s weight—done.

Pick your size and add a pair to the cart now.