Bright visibility up to a quarter mile comes from three COB LEDs, while a built-in USB power bank keeps your phone charged as you wait for help. BlazeGuard is a single safety tool designed to replace multiple roadside devices.
Four modes adapt to the moment: white flood for working, white low beam to conserve power, red steady to mark your position, and red flashing to warn traffic from a distance.
The built-in USB port powers a connected phone so you stay reachable to roadside assistance, family, or emergency services when outlets aren’t available.
With an 180° swivel handle and a rugged ABS shell, you can place it on the pavement, hang it from a hatch, or hold it overhead. It’s designed to endure summer heat and winter cold inside a trunk or glove box.
Three COB LEDs deliver broad, even light, eliminating the hotspot common to small flashlights. The 1200 mAh battery drives all four modes and doubles as a USB charger for devices.
Specs at a glance: sizes S (170 × 188 × 40 mm) or L (240 × 270 × 40 mm); material ABS plastic; battery 1200 mAh, 3.7 V; light source 3 COB LEDs; four modes: white flood, white low, red steady, red flashing. Models include Battery and Solar (Solar recharges in sunlight to stay ready in storage).
Usage steps
- Grab BlazeGuard and extend the 180° swivel handle to stand, hang, or hold for a wide work area.
- Press the mode button to select white flood, white low, red steady, or red flashing as needed.
- If your phone battery is low, connect it to the built-in USB port to stay connected until help arrives.
Notes: When stored off and away from direct sun, the battery holds charge reasonably well; top it up every 2–3 months. The Solar model recharges from sunlight and stays ready in storage. The ABS shell handles typical car temperature swings; avoid leaving it in direct sun on a dashboard for long periods. The 180° swivel handle adapts to most surfaces, making BlazeGuard useful beyond cars as a work light, hunter light, or site marker.